高速率通信网络下时变系统的有限时域H∞控制

针对高速率通信网络和Round-Robin（RR）协议影响下网络化时变系统的有限时域[H∞]控制问题，考虑到系统中存在乘性噪声、随机时滞和量化效应，提出了一种基于观测器的有限时域[H∞]控制器的设计方法。利用李雅普诺夫稳定性理论和线性矩阵不等式（Linear Matrix Inequality，LMI）技术得到有限时域[H∞]控制器存在的充分条件。基于锥补线性化（Cone Complementarity Linearization，CCL）方法通过求解一组递归矩阵不等式得到观测器和控制器参数。所设计的控制器保证闭环网络化时变系统在给定的时域内稳定，且满足预定的[H∞]性能指标。数值仿真验证了所提方法的有效性。     

通信工程网络安全与对策探讨

分析研究目前通信工程网络安全问题,提出几点解决问题的对策,旨在为提升通信工程网络安全性提供一定的帮助,以此来促使通信工程网络系统安全性的提升。     

Misconceptions of human factors concepts

Abstract

Like many scientific topics, Human Factors, and Ergonomics concepts are susceptible to being misunderstood by people unfamiliar with the subject matter. Most of the time these misunderstandings are harmless, like when a safety poster within a work setting encourages employees to 'overcome complacency'. This misunderstanding of complacency suggests it is a motivational aspect of human behaviour correctable with encouragement, whereas the human factors approach to overcoming complacency would be to evaluate how task design could diminish the destructive consequences of unexpected changes within a routine setting. No harm comes from the message within the safety poster, other than some wasted ink and paper, but misconceptions among particular audiences can eventually result in dire consequences for the human operator. This paper presents recent evidence that the concepts are being misapplied by casual consumers of human factors, particularly in the aftermath of accidents within complex systems, in ways detrimental to the core mission of improving the well-being of the human operator. Later, because this special issue presents new ways to demonstrate value via return on investment, practical efforts we can take to overcome such misconceptions are suggested.     

Broadband MIMO Antenna System for 5G Operations in Mobile Phones

A broadband 8‐antenna multiple‐input and multiple‐output (MIMO) system working for 5G new radio N77 (3.3‐4.2 GHz) in mobile terminals is proposed. In particular, each antenna element/unit consists of a monopole‐type meandered branch and an inverted U‐shaped self‐isolated antenna branch; and the antenna unit is fed by the meandered branch. The antenna unit has two resonances generated separately by each branch of the antenna unit. Since the monopole couples strongly with the self‐isolated antenna element that has the inherent self‐isolation characteristics, quite good isolation for the broadband 8‐antenna MIMO system can be obtained. The results such as antenna efficiency, radiation patterns, envelope correlation coefficient, and channel capacity are also presented.     

Controlled Secure Direct Communication Protocol via the Three-Qubit Partially Entangled Set of States

In this paper, we first re-examine the previous protocol of controlled quantum secure direct communication of Zhang et al.’s scheme, which was found insecure under two kinds of attacks, fake entangled particles attack and disentanglement attack. Then, by changing the party of the preparation of cluster states and using unitary operations, we present an improved protocol which can avoid these two kinds of attacks. Moreover, the protocol is proposed using the three-qubit partially entangled set of states. It is more efficient by only using three particles rather than four or even more to transmit one bit secret information. Given our using state is much easier to prepare for multiqubit states and our protocol needs less measurement resource, it makes this protocol more convenient from an applied point of view.     

基于双态混沌PSO的机载激光通信视轴稳定控制

机载空间激光通信视轴稳定是激光通信链路建立的前提。在视轴稳定平台中应用自抗扰控制方法取得了良好的控制效果,但自抗扰控制需调整参数众多且缺乏规范的调整手段。针对自抗扰控制调参难的问题,本文提出了一种利用双态混沌粒子群算法优化自抗扰控制参数的方法。仿真结果表明,与PSO-PID控制方法相比,该方法具有更快的响应速度,更强的抗干扰能力和更好的鲁棒性。     

QKD系统中基于EA电路的诱骗态实现

使用诱骗态量子秘钥方案可以解决因光子数分离攻击而导致的安全漏洞,保证了长距离量子通信的安全。本文介绍了量子通信的相关原理,通过对电吸收调制电路和激光器驱动电路的设计,精确控制产生了1550 nm波段的窄脉冲,经过内部调制成功制备诱骗态光脉冲,其强度约为信号态光脉冲的三分之一,因激光器的同一性而具有一致的光学特征从而避免了时频窃听,并具有强度可调的优点。     

基于紧耦合结构的宽带基站天线设计

随着5G移动通信频段的公布,传统基站天线已不足以覆盖其工作频段。文章以紧耦合阵列天线理论为基础,提出了一种基于紧耦合结构的交叉偶极子宽带基站天线。该天线由两对正交的领结状偶极子天线构成,通过两对交叉偶极子之间的耦合效应,有效地展宽了天线的阻抗带宽。同时,通过在天线和金属反射板之间加载电阻型频率选择表面,吸收由反射板引入的谐振反射波,改善天线高频端辐射性能。仿真及测试结果表明:该天线在1.7-3.6 GHz 频率范围内,可以满足基站天线的设计指标,两端口驻波比均小于1.5,两端口之间隔离度大于55 dB,半功率波束宽度满足65°±5°范围,且整个频段内增益均大于8.5 dBi。     

一种基于LTCC基板的数字光收发模块设计

首先介绍低温共烧陶瓷(LTCC)技术和数字光收发模块,阐述LTCC的技术特点、工艺流程以及它相较于传统PCB电路基板的优势,解释了数字光收发模块的通信原理和工作方式;其次,提出了一种基于LTCC电路基板的数字光收发模块的设计方案,详细介绍了该光模块的主要构成和实现方法,包括电路设计和关键器件的比较和选取;最后,通过对该方案所述的数字光收发模块的样件进行关键指标和性能测试,验证了该设计方案的可行性。     

PLC与单片机之间的串行通信及应用

在工业自动化控制领域,较为重要的内容就是PLC和单元机之间的远距离控制,并且在自控系统设计过程中,经常遇到的难题就是PLC和单片机之间远距离通信,基于PLC和单片机两者优势充分发挥的基础上,能够确保PLC和单片机之间串行通信的良好实现。本文基于实际情况的基础上,通过对现阶段较为常见且应用较为广泛的单片机进行分析探讨。